Friday, 12 January 2018 22:27

ODOR CONTROL

Odor Control

Odor Control Products

Odor Control Products provided by Air One, Inc. are engineered with a variety of components to suit your requirements. Our odor control systems are manufactured to meet a variety of requirements (EPA, OSHA, etc.) based upon your specific situation. Air One odor control systems are modular, easily maintained and economical.  Air One has a line of deodorizers including surface deodorizing agents and air deodorizing agents.  We offer a water soluble odor control treatment agent and product.  This is a portable unit that can be plugged into your power source and comes equipped with a 500 gallon water tank.

  • Easy to use and minimal maintenance
  • Most area coverage available
  • Compared to a perimeter misting system, this product has the ability to use up to 80% less chemical treatment concentrate

Air and surface odor eliminators.

Air One Inc is a leading distributor for deodorization and odor control chemicals and products.  As a company, we have the support of a large and diverse manufacturing base which provides a vast selection of odor removal solutions.  Air One, Inc offers clients the best possible products for your industrial and commercial odor problems.

Odor Control Products | Misting and Filtration Systems

High Pressure Odor Control

High Pressure Odor Control Products 
High pressure odor control products & dust control systems assist with the treatment of airborne dust and odor molecules.

Disc Fans for Odor Control
Practical and economical alternative for odor and dust suppression in recycling facilities and smaller transfer stations.

Portable Odor Control Systems
These units are designed for use in remote areas where a conventional system can not achieve the desired results.

 

 

 

Odor Control Products & Solutions

Air One also offers odor control products and solutions in liquid form that are designed to neutralize odors and mask them.

Tuesday, 09 January 2018 20:53

Environmental Separation

Environmental Separation

Air One, Inc. provides several industrial environmental separation systems and solutions engineered with a variety of components to suit your requirements. Environmental separation systems assist with maintaining compliance with local and state regulations for doorway openings by working to keep dust and odors within your facility.

 

Industrial Door Environmental Separation Systems

Air Curtain Doors

Air Curtain Doors
Our Air Curtain Doors inhibit air, dust, smoke, insects and odors from entering or leaving through doorway openings while permitting unrestricted entry and exit.

Industrial Strip Doors

Industrial Strip Doors
Our Industrial strip doors are the most economical solution to protect employees, equipment and the environment from adverse environmental conditions such as noise, heat, cold, humidity, dust and drafts.

Fast Doors

Fast Doors
These roll-up doors are ideal for warehouse-to-warehouse separation, helping to control contamination, minimizing airflow between rooms and reducing utility and maintenance costs.

 

Tuesday, 09 January 2018 19:18

DUST SUPPRESSION CANNONS

DUST SUPPRESSION CANNONS

Spraystream is a misting canon that produces a mist blanket of microdroplets for  IN- and OUTDOOR dust control. The mist absorbes the airborne dust particles and causes them to fall to the ground (air washing).

The Spraystream technology suppresses dust generated in crushing and demolition sites, in material storage, cross-docking of bulk goods and during the misting of spray products in agriculture and horticulture.

Our industrial dust suppression systems are wall, cart or trailer mounts and can be used indoors and outdoors in an environmentally friendly and efficient way.

Tuesday, 09 January 2018 19:16

PORTABLE ROTARY FORGGERS

Portable Rotary Foggers / SS-25C

 

rotary fogger pg 2

How they work

The Spraystream SS-25c is the newest portable device in Air One’s line of defense against dust and odors. The ability for the SS-25c to control very fine particulate and odor in larger spaces is unparalleled by any other apparatus on the market today.

The SS-25c uses less water, power and equipment than our competitor and can project a stream of very fine  horizontal mist up to 75-feet from the front of the unit.   When coupled with the oscillating option, each SS-25c unit can cover up to 7,500-square feet of area. With the addition of a dosing pump to add surfactants and/or deodorizers, there is little the SS-25c can not do in larger transfer stations and recycling centers.  Rotary foggers are the most economical alternative to conventional high pressure nozzle systems for odor and dust suppression in larger facilities.

Simple Operation

Uses a simple air assisted centrifugal water flow system that atomizes water into tiny droplets (20-micron).

They do not use nozzles, high pressure pumps or compressors.

Durable and Reliable

Comes in epoxy coated steel housing. Motors and fans are duty rated for consistent performance and reliability.

Water Managementrotary fogger 1 pg

Spray volume is completely adjustable from 0-gallons per hour (gph) up to 10-gph. The system can be operated on domestic water supply pressure or a low pressure booster pump.

Remote areas

These units are designed for use in remote areas where a conventional system can not achieve the desired results.

Technical Specifications

 link to video 

Fan Diameter   – 18 inch 2.2 kw 230 V/ 60 HZ/ 30 AMP/ 1PH
16 cleanable filtered nozzles Offroad cart option
1.0 gpm average water flow VFD pump option
Average 10 micron droplet Remote control option
Maximum mist throw – 75 feet of throw 1000 psi high pressure pump
Tuesday, 09 January 2018 19:14

Rotary Foggers

Rotary Foggers / ss25i

How They Work

The Spraystream SS-25i is the newest in Air One’s line of defense against dust and odors in larger indoor areas. The ability for the SS-25i to control very fine particulate and odor in larger spaces is unparalleled by any other apparatus on the market today.

The SS-25i uses less water, power and equipment than our competitor and can project a stream of very fine  horizontal mist up to 75-feet from the front of the unit.   When coupled with the oscillating option, each SS-25i unit can cover up to 7,500-square feet of area. With the addition of a dosing pump to add surfactants and/or deodorizers, there is little the SS-25i can not do in larger transfer stations and recycling centers.  Rotary foggers are the most economical alternative to conventional high pressure nozzle systems for odor and dust suppression in larger facilities.

Simple Operation

The SS25 uses a simple fan assisted centrifugal water flow system that atomizes water into small droplets (average 10 micron droplet). They do not use nozzles, high pressure pumps or compressors.

Durable and Reliable

The SS25 come in lightweight composite housings. Motors and fans are duty rated for consistent performance and reliability.

Water Management

Spray volume is completely adjustable from 0-gallons per hour (gph) up to 60-gph with an average of 1 gallon per minute average water flow. The system can be operated on domestic water supply pressure or a low pressure booster pump.

Available Models 

  • Ceiling mounted, non-oscillating
  • Ceiling mounted, oscillating

Technical Specifications

 18 inch 2.2 kw fan 230 V/ 60HZ/ 30 AMP/ 1PH
16 cleanable filtered nozzles Oscillating option
1.0 gallon per minute average water flow VFD pump option
75 feet of throw Remote control option
Average 10 micron droplet 1000 psi high pressure pump
Tuesday, 09 January 2018 19:12

DUST CONTROL

Dust Control

Dust Collection System | Dust Control

Dust Collection System Design - Example of a dust control solution of Air One Inc's installs.

Dust Collection System

When you run an industrial operation that creates dust you must have a proper dust collection system designed and installed.  A Dust collection system is often mandates by laws and regulations in your industry.  A dust collection system will keep your employees safe from dust hazards.  Breathing in dust can be detrimental to one’s health.

Industrial dust creation can pose a serious threat to your people, your product and your facility. Dust is inherent in a wide range of industries such as Recycling of Construction and Demolition (C&D) or Municipal Solid Waste (MSW), Sewage Treatment works, Quarries and Foundaries, Cement or Concrete, Pulp & Paper and any industry where dust is produced or disturbed — making it airborne.  Air One, Inc has 10 + years of custom dust collect system design and implementation.

Dust Collection System | Recycling Construction and Demolition (C&D)

Dust Collection System - Misting Example

Misting Systems for Dust Control

Industrial Dust Control Systems

Our dust control systems are designed and engineered to meet your specific business’ needs. We understand that each site or facility presents a unique circumstance.

Protects Your People, Your Product, Your Facility

Air One dust control systems are custom engineered for your specific application and help to protect your people and your business.

Dust Control for C&D

Dust Collection System for Municipal Solid Waste (MSW)

Dust Collection System - Rotary Fogger Example

Rotary Fogger- Dust Control

Air One, inc. will create a dust solution tailored to your space and budget allowing you to capture dust at the source of the problem.  It’s well known that inhaling dust particles and airborne bacteria at solid waste processing plants can be hazardous to your health especially in the Solid Waste Industries- by the nature of the waste being broken down.  The United States Environmental Protection Agency (EPA) has imparted strict rules regarding dust collection systems that must be implemented in plants in the Solid Waste Industry.  According to the federal Occupational Safety and Health Administration (OSHA) the potential for human health harm becomes exponentially worse over time:  our respiratory systems and our skin can become increasingly more and more sensitive to wood dust and other dusts, the more we become exposed to it.  Allergies can develop over time and become more evident with a faster onset as your body sensitizes to the dust.  Allergic reactions such as nasal dryness, asthma, dermatitis and eye irritations can occur.

Dust Collection System for Recycling Environments

Dust Collection System for Recycling Industries

Recycling Dust Control

Recycling construction and demolition debris and MSW involves materials like wood, cement and paper that produce dust when processed.  OSHA has classified wood dust as a known carcinogen, causing cancer.

In addition to health hazards, the presence of dust in the workforce can cause fire and safety hazards.  Wood or saw dust can easily catch fire if a spark arises.  Wood or saw dust can create a slipping hazard on the floor.  Our Dust Collection System Designs will take care of these potential issues for you and Air One, Inc will do this in an affordable, safe, and efficient manner.  Our Dust Collection Systems can be designed without taking up floor space with adapters and accessories to bring dust collection to every nook and cranny inside your operating facility.  Our experienced team offers installation after the design stage is complete.

Air One has a Dust Collection System designed specifically for these demanding environments.  Contact us today so we can do a free consultation as the first step in the process.

Tuesday, 09 January 2018 18:46

Low Pressure Dust Control

Low Pressure Dust Control

Low Pressure Dust Control

Low Pressure Dust Control in Action:  PA Landers in Plymouth, MA (left)

Low Pressure Dust Control:  How they work

Low pressure systems use “street” pressure and/or a booster pump to deliver water through nozzles at an operating pressure below 100-pounds per square inch (psi). At this pressure, the water is delivered at a higher flow rate than a high pressure system and the droplet size is significantly larger (average 50-microns).  A low pressure dust control system is designed as a dust containment system where only the respirable or fine size particles are moved to the collection device.  The larger dust particles are contained instead of conveyed and are returned to the process stream.  At the pickup points, the pickup air flows, capture velocities, hood design and static pressures are the same in a high or low velocity transport system.

What Low Pressure Dust Control Does 

Low pressure systems provide dust suppression to nuisance type dust emission facilities (aggregates operations and stockpile locations). These types of systems work best with larger dust particles.

Where they fit

Low pressure systems are typically found in industrial facilities within buildings and mounted on portable equipment. Low pressure systems use large amounts of water and require a significant amount of space to house the associated equipment.

Why Use Low Pressure Dust Control

To control fugitive dust emissions relative to “nuisance” dusts.  The advantages of the low pressure system are lower energy consumption, lower maintenance cost, and more reliable dust control.  A high pressure system may lose effectiveness more quickly than a low pressure system.  A low pressure system may have a higher initial cost but in the long run you are saving on energy and maintenance costs.

Coverage and flow

The coverage area per system is variable. Air One can design a system that will treat dust emission source points and/or your entire facility. Depending on the water pressure and nozzle specification, typical systems range in flow rates from 3-gallons per minute up to 15-gallons per minute.

Sources:  AIHA

Tuesday, 09 January 2018 18:45

High Pressure Dust Control Systems

High Pressure Dust Control Systems

High Pressure Dust Control Systems

High Pressure Dust Control Systems in Action:  ACE Recycling in NJ (left) and New England Recycling (right)

High Pressure Dust Control Systems | How they work

High pressure dust control systems are essential in a large material transfer facility or  a material processor facility.  AirOne, inc. helps your company design and implement these systems.

These dust control systems utilize a pump to drive the water pressure to a point where the result is “atomization” of the water molecule. This is achieved using a piston or plunger type pump, high pressure tubing and nozzles. The water molecule size typically ranges from 50-microns down to as small as 10-microns.  These misting systems help with dust suppression, dust abatement, and air filtration.

What Our Dust Control Systems Do

High pressure dust control systems assist with the treatment of airborne dust and odor molecules. They can be confined to focus on very small areas (feed hopper or transfer point) or cover larger areas (entire facilities). Air One high pressure control systems can be constructed of multiple zones to control different areas of the facility or a single zone that covers a larger area.

Where the Dust Control Systems Fit

High pressure dust control systems are typically found in industrial facilities within the confines of on-site buildings. High pressure systems use a modest amount of water and electricity and require a small amount of space to house the associated equipment.

Why to use

High pressure dust control systems are an effective means to suppress dust and odors inside buildings.

Coverage and flow

The coverage area per system is variable. Air One can design a high pressure dust control system that will treat dust emission sources, odor emitting areas and/or your entire facility. Depending on the pump and nozzle specification, typical systems range in flow rates from 1.5-gallons per minute up to 10-gallons per minute.

Sources:  Osha.gov
Tuesday, 09 January 2018 18:44

Granular Masking Agents

Granular Masking Agents
Scents
Pitch-In – Clay Based Masking Agent Granules  
Pitch-In is a clay based granular product that is impregnated with an odor masking agent. Pitch-In is great for masking odors emanating from solid waste containers, organic matter and identifiable odor generating materials. Pitch-In is available in containers ranging from 15-pounds up to 100-pounds. Citronella Pitch-In also provides excellent bug-repellant qualities.
Data Sheet (36K) 
MSDS (36K) 
MSDS – Cintronella (36K) 
Pine
Cherry
Citronella
Floral
   
Odor Zorb – Corn Cob Based Masking Agent Absorbent Granules  
Odor Zorb is a corn cob based absorbent product that is impregnated with an odor masking agent. Odor Zorb is great for masking odors emanating from solid waste containers and organic matter, and is highly absorbant. Citronellla Odor Zorb also provides excellent bug-repellant qualities.
Friday, 12 May 2017 00:00

Fast Doors

Fast Doors

Fast Doors

These roll-up doors are ideal for warehouse-to-warehouse separation, helping to control contamination, minimizing airflow between rooms and reducing utility and maintenance costs.

Fast doors maximize energy savings by minimizing the amount of air exchange that can escape each time the doors open and close. Unlike traditional hard bi-parting doors, flexible roll-up Fast Doors have the ability to withstand forklift impact and snap right back into their tracks. This is a huge benefit in a warehouse space, where damaged doors can mean significant expenses in terms of downtime and service calls, as well as energy loss.

Benefits

  • Maintains and Isolates Environments
  • Reduced Energy Consumption
  • Blocks Airborne Pollutants
  • Improves Employee Comfort, Security and Productivity

Features

  • Extruded Aluminum Tracking Guides
    • Allow the FRD-Vinyl roll-up door to move up and down smoothly
  • Extruded Aluminum Stiffener Bars
    • These high-strength stiffeners combat winds and negative air pressure and prevent the door from being set out of position.
  • Tap and Go Breakaway Bar
    • Prevents FRD-Vinyl doors from breaking if hit. The bottom bar releases in either
      direction and can easily be put back into the track.
Page 1 of 2
×

Pop Up Panel

Here is the pop up panel you can use to promote of any product or service that you think your customers should see at the very bottom of the website. You can use 6 different modules positions between intro-1 and intro-6.

FIND OUT MORE BUY TODAY!


TOP